具有外套管的释热元件表面温度求解

为进行具有外套管的释热元件的性能分析，需准确计算元件包壳外侧的温度分布。由于套管结构内外均存在流体，传热情况较为复杂，因此本文基于传热基本方程和能量守恒关系，设计开发了专用的迭代算法和计算程序求解该结构温度分布，并采用典型算例，将计算结果与Fluent软件仿真结果进行对比。结果表明，本文程序计算结果与Fluent软件仿真结果的相对误差小于5%。基于本算法编写的程序模块与燃料元件性能分析程序相耦合，可提高燃料性能分析流程的独立性。     

The control of paracetamol particle size and surface morphology through crystallisation in a spray dryer

The parameters governing the crystallisation of paracetamol using various conventional techniques has been extensively studied, however the factors influencing the drug crystallisation using spray drying is not as well understood. The aim of this work was to investigate the crystallisation of an active pharmaceutical ingredient through evaporative crystallisation using a spray dryer to study the physicochemical properties of the drug and to use semi-empirical equations to gain insight into the morphology and particle size of the dried powder. Paracetamol solutions were spray dried at various inlet temperatures ranging from 60 °C to 120 °C and also from a series of inlet feed solvent compositions ranging from 50/50% v/v ethanol/water to 100% ethanol and solid-state characterisation was done. The size and morphology of the dried materials were altered with a change in spray drying parameters, with an increase in inlet temperature leading to an increase in particle Sauter mean diameter (from 3.0 to 4.4 µm) and a decrease in the particle size with an increase in ethanol concentration in the feed (from 4.6 to 4.4 µm) as a result of changes in particle density and atomised droplet size. The morphology of the dried particles consisted of agglomerates of individual crystallites bound together into larger semi-spherical agglomerates with a higher tendency for particles having crystalline ridges to form at higher ethanol concentrations of the feed.     

改性氧化钛对羟乙基乙二胺水溶液解吸CO2的强化

羟乙基乙二胺（AEE）水溶液的CO₂循环吸收量高（1.2molCO₂/molAEE），吸收速度快，稳定性好，但解吸速度慢、解吸量少（0.8mol CO₂/mol AEE）是限制该技术广泛应用的主要原因。本文通过向AEE水溶液中添加质量分数为0.05%～0.20%的改性氧化钛（TiO₂-MWCNT和TiO₂-OH）强化AEE的解吸能力。CO₂循环吸收（40℃）-解吸（120℃）实验结果表明改性氧化钛的添加比氧化钛强化CO₂解吸效果更好，强化顺序为TiO₂-MWCNT＞TiO₂-OH；其对应的最大解吸速率分别为0.093L/min（质量分数0.15%）和0.083L/min（质量分数0.20%），相对于AEE水溶液，分别提高了32.9%和18.6%；其对应的最大解吸量分别为0.92molCO₂/molAEE（质量分数0.15%）和0.88molCO₂/molAEE（质量分数0.20%），分别提高了12.2%和9.7%；其对应的CO₂循环吸收量分别是0.95molCO₂/molAEE（质量分数0.15%）和0.89molCO₂/molAEE（质量分数0.15%），分别提高了18.75%和11.25%；5次循环吸收解吸实验结果表明改性氧化钛强化CO₂解吸效果稳定，具有较强的化学稳定性。对反应后的改性氧化钛进行XRD、BET、FTIR和SEM表征，结果表明改性氧化钛具有较强的结构稳定性。TiO₂-MWCNT和TiO₂-OH在促进有机胺溶液解吸CO₂方面具有一定的工业应用潜力。     

液压阻尼孔的宽温度范围流动特性试验研究

研制一种适合对各种液压孔口或缝隙进行高低温流体力学试验的新型试验装置，运用该装置对具有不同几何参数的液压阻尼孔进行在-50~80℃宽温度范围内的流动特性试验，研究以普通抗磨液压油HM46和低温抗凝减振器油TITAN SAF 5045为工质及其温度变化时对液压阻尼孔流量-压力特性曲线、幂指数和流量系数的影响，研究表明，在低温条件下，液压阻尼孔的流量系数均因油液黏度增大、流动性变差而呈线性下降的趋势，从宏观上看，HM46通过液压阻尼孔时的流动稳定性较差，其对应流量系数的下降幅度明显大于TITAN SAF 5045对应的下降幅度，厚壁小孔流量系数的下降幅度明显大于薄壁小孔对应的下降幅度。研究所获得的新型试验装置、试验数据分析方法和具体理论公式为深入研究和优化现代液压元件在宽温度范围内的动态性能提供新型试验平台与理论基础。     

内插式真空管太阳能热水器热特性理论及实验研究

设计了一种内插式真空管热水集热器,通过对其能量转换、传输特性研究,建立了内插式真空管集热器的热特性分析模型,并对不同设计参数和气候条件对内插式真空管热特性的影响进行了分析。结果表明,设计的集热器理论热效率最大可达79.5%,但其受环境温度、集热器工作温度等影响较大。此外,设计了由14只内插式真空管组成的太阳能热水器,采用迟滞算法将热水温度控制在50～55℃,实验结果表明,样机系统的日热效率可达55.0%,样机输出热水近120 kg,具有较好的实用价值。     

New insight to the oxidation kinetics of silicon-containing steel at high temperature

This study investigated the oxidation kinetics of silicon-containing steel at 1150–1300 °C using a Simultaneous Thermal Analyzer under atmospheric conditions similar to that of an industry reheating furnace. There is a critical time point for the oxidation kinetics at an oxygen concentration of 4·0 vol.-%., following which the oxidation rate constant increases with the increasing oxidation temperature. The model coefficient A in the kinetic oxidation equation was found to be constant. However, before the critical time point, the oxidation rate constant remained unchanged; the model coefficient A decreased with the increasing temperature. Therefore, the kinetic model of silicon-containing steel for isothermal oxidation was observed to be a modified one on the basis of the experimental data. In addition, the critical time point was prolonged with the increasing isothermal oxidation temperature. Moreover, the oxidation activation energy of the tested silicon-containing steel was 366·16 kJ mol^?1.     

烟气CO2捕集热能梯级利用节能工艺耦合优化

醇胺法捕集CO₂技术是一种较成熟的CO₂捕集技术，具有吸收速度快、脱除效果好等显著优点，但其操作费用高、解吸能耗大。本文以降低醇胺法捕集烟气中CO₂系统再生能耗为出发点，对常规醇胺法捕集CO₂工艺统进行了节能优化研究。在常规工艺流程基础上引入压缩式热泵节能技术，并利用Aspen Plus软件建立了基于压缩式热泵技术的CO₂捕集工艺流程模型。研究了压缩式热泵与机械蒸汽压缩回收（MVR）热泵、分流解吸、分布式换热、级间冷却4种节能工艺耦合，通过模拟计算与优化，结果说明了最佳节能工艺组合为“解吸塔压缩式热泵+贫液MVR热泵+分流解吸+级间冷却”耦合的CO₂捕集工艺流程，当解吸塔顶气体分流比为0.25∶0.75、冷富液分流比为0.05∶0.95、级间冷却器位于吸收塔17块塔板位置、吸收塔输入冷量为-3.0GJ/h时，系统再生能耗最低，为2.533 GJ/tCO₂，相比常规有机胺工艺（再生能耗4.204GJ/tCO₂）节能率39.748%。     

某船用柴油机排气管路流-固耦合计算与保温效果研究

对某船用柴油机排气管路的流动与传热过程开展流-固耦合仿真分析。结果表明:受排气管路结构影响，管内流动方向和流速发生变化，局部区域产生明显的回流现象；排气管路外表面温度分布差异较大，平均温度高达534 ℃。为达到柴油机安全设计要求，在排气管路外壁敷设保温材料。分析结果表明:气凝胶纳米材料的保温效果优于硅酸铝纤维材料，在相同的运行条件和使用要求下，气凝胶纳米材料的敷设厚度更薄。     

Unsteady free convection of second‐grade nanofluid with a new time‐space fractional heat conduction

The Caputo and Caputo–Fabrizio derivative are applied to study a second‐grade nanofluid over a vertical plate. A comparative analysis is presented to study the unsteady free convection of a second‐grade nanofluid with a new time–space fractional heat conduction. The governing equations with mixed time–space fractional derivatives are non‐dimensionalized and solved numerically, and a comparison between the Caputo and the Caputo–Fabrizio models is made. It is found that the temperature is higher for the Caputo–Fabrizio fractional model than the Caputo model, but the higher velocity only exists near the vertical plate for the Caputo–Fabrizio model than the Caputo model. Moreover, the velocity for the Caputo model will exceed the Caputo–Fabrizio model as y evolves.     

Numerical evaluation and the effects of geometrical and operational parameters on thermal performance of the shell and double coil tube heat exchanger

Heat exchangers are extensively used in various industries. In this study, the impact of geometric and flow parameters on the performance of a shell and double helical coil heat exchanger is studied numerically. The investigated geometric parameters include external coil pitch, internal coil pitch, internal coil diameter, and coil diameter. The influences of considered geometrical parameters are analyzed on the output temperature of the hot and cold fluid, convective heat transfer coefficient, pressure drop, and average Nusselt number. Water is considered as working fluid in both shell and tube. As an innovation, double helical coils are used instead of one in the heat exchanger. To compare the obtained results accurately, in each section, the heat transfer area (coil outer surface) is kept constant in all models. The results show that the geometrical parameters of double helical coils significantly affect the heat transfer rate.